Frame
Welded heavy-duty
Primer / paint - E-coat / powder
Weight bracket - Standard rear - each holds up to four Quik-Tatch weights, 42 lb. (19 kg)
Hood material - Fully enclosed, molded-in color material reduces sound, will not rust or dent
Welded heavy-duty
Primer / paint - E-coat / powder
Weight bracket - Standard rear - each holds up to four Quik-Tatch weights, 42 lb. (19 kg)
Hood material - Fully enclosed, molded-in color material reduces sound, will not rust or dent
Seat
Type - Open-back design with grasp
Back height - 15 in. (38 cm)
Suspension - Tilt, two coil springs, three-position no-tools adjustment for operator weight
Type - Open-back design with grasp
Back height - 15 in. (38 cm)
Suspension - Tilt, two coil springs, three-position no-tools adjustment for operator weight
Seat Adjustment
Fore and aft - While seated, ball bearing slide rail, 15-position, 6.6 in. (17 cm)
Fore and aft - While seated, ball bearing slide rail, 15-position, 6.6 in. (17 cm)
Safety Features
Meets ANSI standard
Meets OPEI standard
Safety video
Meets ANSI standard
Meets OPEI standard
Safety video
Drive System
Dual belts
Electric power take-off (PTO) clutch, in-line belt
Dual belts
Electric power take-off (PTO) clutch, in-line belt
Transmission
K72 hydrostatic integrated with transaxle
Control - Twin Touch™ pedals
Differential lock - Standard
K72 hydrostatic integrated with transaxle
Control - Twin Touch™ pedals
Differential lock - Standard
Travel Speed Forward
0 - 7.2 mph (0 - 11.6 km/h)
0 - 7.2 mph (0 - 11.6 km/h)
Travel Speed Reverse
0 - 5.2 mph (0 - 8.4 km/h)
0 - 5.2 mph (0 - 8.4 km/h)
Wheels/Tires
Front tires - 15 x 6.5-8
Rear tires - 24 x 12-12 turf
Front tires - 15 x 6.5-8
Rear tires - 24 x 12-12 turf
Axles
Front - Cast iron front axle, front wheel ball bearings
Front - Cast iron front axle, front wheel ball bearings
Brakes
Internal wet disc
Internal wet disc
Engine Model
FR730V
FR730V
Engine Type
Overhead valve, full-pressure lube, oil filter
Overhead valve, full-pressure lube, oil filter
Cylinders
V-twin, cast-iron liners
V-twin, cast-iron liners
Horsepower
24 hp (17.9 kW)
24 hp (17.9 kW)
Displacement
726 cc (44.3 ci.)
726 cc (44.3 ci.)
Carburetion
Pulse pump and carburetor
Pulse pump and carburetor
Air Cleaner
Dry, replaceable
Dry, replaceable
Lubrication
Full pressure with oil filter
Oil cooler - Fins and fan on transaxle
Oil change - No-tools oil drain with replaceable filter
Full pressure with oil filter
Oil cooler - Fins and fan on transaxle
Oil change - No-tools oil drain with replaceable filter
Fuel Type
Gasoline
Gauge - On dash
Tank location - Rear
Gasoline
Gauge - On dash
Tank location - Rear
Fuel Capacity
4.4 US gal. (16.7 l)
Fill opening - On left fender, 3 in. (7.6 cm)
4.4 US gal. (16.7 l)
Fill opening - On left fender, 3 in. (7.6 cm)
Wheelbase
51.2 in. (1,300 mm)
51.2 in. (1,300 mm)
Length
Overall - 74.6 in. (1,894 mm)
Overall - 74.6 in. (1,894 mm)
Width
With mower - 62.6 in. (1,590 mm)
With mower (deflector raised for storage) - 52.6 in. (1,335 mm)
Without mower - 40.7 in. (1,034 mm)
With mower - 62.6 in. (1,590 mm)
With mower (deflector raised for storage) - 52.6 in. (1,335 mm)
Without mower - 40.7 in. (1,034 mm)
Height
46.1 in. (1,171 mm)
46.1 in. (1,171 mm)
Weight
Mower, no fuel - 737 lb. (334 kg)
Mower, no fuel - 737 lb. (334 kg)
Cutting Width
Accel Deep™ mower deck, 48 in. (122 cm)
Accel Deep™ mower deck, 48 in. (122 cm)
Turning Radius
16 in. (40.6 cm)
Uncut circle radius - 23 in. (58 cm)
16 in. (40.6 cm)
Uncut circle radius - 23 in. (58 cm)
Mowing Height Range
1 - 4 in. (2.5 - 10.2 cm)
1 - 4 in. (2.5 - 10.2 cm)
Mowing Height Adjustments
13 positions, 0.25 in. (0.64 cm) increments
13 positions, 0.25 in. (0.64 cm) increments
Cutting Height
Preset
Preset
Steering
Manual, sector and pinion
Wheel - 14 in. (35.6 cm)
Manual, sector and pinion
Wheel - 14 in. (35.6 cm)
Deck Construction
Forged steel deck shell
Mower wash port
Wheels - Four
Wheel adjustment - Seven-position, spring-loaded pin
Level adjustment - Exact Adjust ports and onboard deck-leveling gauge
Forged steel deck shell
Mower wash port
Wheels - Four
Wheel adjustment - Seven-position, spring-loaded pin
Level adjustment - Exact Adjust ports and onboard deck-leveling gauge
Deck Material
10 ga., 0.135 in. (3.4 mm)
Fender - Stamped steel
Floor mats - Sure-grip rubber
Service interval decal
10 ga., 0.135 in. (3.4 mm)
Fender - Stamped steel
Floor mats - Sure-grip rubber
Service interval decal
Deck Lift
Foot pedal with adjustable spring assist
Foot pedal with adjustable spring assist
Spindles
Bushings - Metal, replaceable
Bushings - Metal, replaceable
Cruise control
Yes, button on dash
Yes, button on dash
Attachment Lift
Type - Roll under tractor
Front draft arms - Attached with spring pins at two points
Rear draft arms - Quick-pull pins
Mower wheels rotate - Yes, 90 degrees for easy mower removal
Type - Roll under tractor
Front draft arms - Attached with spring pins at two points
Rear draft arms - Quick-pull pins
Mower wheels rotate - Yes, 90 degrees for easy mower removal
Includes
Governor - Mechanical
Choke / speed control - Separate levers, automatic choke return
Equipment mounting - Yes, heavy duty
Storage - Yes, under seat and covered toolbox
Fender handles / grips - Handles
Cup holder
12 V outlet
Governor - Mechanical
Choke / speed control - Separate levers, automatic choke return
Equipment mounting - Yes, heavy duty
Storage - Yes, under seat and covered toolbox
Fender handles / grips - Handles
Cup holder
12 V outlet
Warranty
4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model.)
4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model.)