Frame
Welded heavy-duty
Primer / paint - E-coat / powder
Weight bracket - Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb. (19 kg)
Hood material - Fully enclosed, molded-in color material reduces sound, will not rust or dent
Welded heavy-duty
Primer / paint - E-coat / powder
Weight bracket - Standard front and rear - each holds up to four Quik-Tatch weights, 42 lb. (19 kg)
Hood material - Fully enclosed, molded-in color material reduces sound, will not rust or dent
Seat
Type - Cut-and-sewn high-back
Back height - 21 in. (53 cm)
Suspension - Six-position parallel arm
Type - Cut-and-sewn high-back
Back height - 21 in. (53 cm)
Suspension - Six-position parallel arm
Seat Adjustment
Fore and aft - While seated, ball bearing slide rail, 15-position, 6.6 in. (17 cm)
Fore and aft - While seated, ball bearing slide rail, 15-position, 6.6 in. (17 cm)
Safety Features
Meets ANSI standard
Meets OPEI standard
Safety video
Meets ANSI standard
Meets OPEI standard
Safety video
Drive System
Dual belt
Electric power take-off (PTO) clutch, in-line belt
Dual belt
Electric power take-off (PTO) clutch, in-line belt
Transmission
K72 hydrostatic integrated with transaxle
Control - Twin Touch™ pedals
Differential lock - Standard
K72 hydrostatic integrated with transaxle
Control - Twin Touch™ pedals
Differential lock - Standard
Travel Speed Forward
0 - 7.2 mph (0 - 11.6 km/h)
0 - 7.2 mph (0 - 11.6 km/h)
Travel Speed Reverse
0 - 5.2 mph (0 - 8.4 km/h)
0 - 5.2 mph (0 - 8.4 km/h)
Wheels/Tires
Front tires - 16 x 6.5-8 turf
Rear tires - 24 x 12-12 turf
Front tires - 16 x 6.5-8 turf
Rear tires - 24 x 12-12 turf
Axles
Front - Cast iron front axle, front wheel ball bearings
Front - Cast iron front axle, front wheel ball bearings
Brakes
Internal wet disc
Internal wet disc
Engine Model
FS730 EFI
FS730 EFI
Engine Type
Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
Cylinders
V-twin, cast-iron liners
V-twin, cast-iron liners
Horsepower
25.5 hp (19 kW)
25.5 hp (19 kW)
Displacement
726 cc (44.3 ci.)
726 cc (44.3 ci.)
Carburetion
Open-loop electronic fuel injection (EFI)
Open-loop electronic fuel injection (EFI)
Air Cleaner
Dry, replaceable with foam precleaner
Dry, replaceable with foam precleaner
Starter
Solenoid shift
Solenoid shift
Lubrication
Full pressure
Oil cooler - Fins and fan on transaxle
Oil filter - Yes, replaceable
Oil change - No-tools oil drain with replaceable filter
Full pressure
Oil cooler - Fins and fan on transaxle
Oil filter - Yes, replaceable
Oil change - No-tools oil drain with replaceable filter
Fuel Type
Gasoline
Gauge - On dash
Tank location - Rear
Gasoline
Gauge - On dash
Tank location - Rear
Fuel Capacity
4.4 US gal. (16.7 l)
Fill opening - On left fender, 3 in. (7.6 cm)
4.4 US gal. (16.7 l)
Fill opening - On left fender, 3 in. (7.6 cm)
Wheelbase
51.2 in. (1,300 mm)
51.2 in. (1,300 mm)
Length
Overall - 77.4 in. (1,966 mm)
Overall - 77.4 in. (1,966 mm)
Width
With mower - 62.6 in. (1,590 mm)
With mower (deflector raised for storage) - 52.6 in. (1,335 mm)
Without mower - 40.7 in. (1,034 mm)
With mower - 62.6 in. (1,590 mm)
With mower (deflector raised for storage) - 52.6 in. (1,335 mm)
Without mower - 40.7 in. (1,034 mm)
Height
52.7 in. (1,338 mm)
52.7 in. (1,338 mm)
Weight
Mower, no fuel - 776 lb. (352 kg)
Mower, no fuel - 776 lb. (352 kg)
Cutting Width
Accel Deep™ mower deck, 48 in. (122 cm)
Accel Deep™ mower deck, 48 in. (122 cm)
Turning Radius
22 in. (55.9 cm)
Uncut circle radius - 27 in. (68.6 cm)
22 in. (55.9 cm)
Uncut circle radius - 27 in. (68.6 cm)
Mowing Height Range
1 - 4 in. (2.5 - 10.2 cm)
1 - 4 in. (2.5 - 10.2 cm)
Mowing Height Adjustments
13 positions, 0.25 in. (0.64 cm) increments
13 positions, 0.25 in. (0.64 cm) increments
Cutting Height
Preset
Preset
Includes
Governor - Constant-speed electronic throttle control
Equipment mounting - Yes, heavy duty
Storage - YYes, covered toolbox
Fender handles / grips - Handles
Cup holder
12V outlet
Governor - Constant-speed electronic throttle control
Equipment mounting - Yes, heavy duty
Storage - YYes, covered toolbox
Fender handles / grips - Handles
Cup holder
12V outlet
Warranty
4 year / 500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model.)
4 year / 500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model.)