Compare Models

Home › Brands › Compare Models

2022 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp in Old Saybrook, Connecticut — 2022 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp

View Details

Specs
Features

General Information

Manufacturer

Toro

Model Year

2022

Model

Z Master 3000 60 in. Kawasaki FX 25.5 hp

Model Code

72950

Color

Red

Body

Frame

Carrier - 3 x 1.5 in. x 10 ga.

Seat

Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent

Rollover Protection (ROPS)

Folding; standard

Drivetrain

Travel Speed Forward

10 mph

Wheels/Tires

Anti-Scalp Wheels - 4 standard

Drive Tires

24 x 12 - 12 in.

Steering Tires

Caster - 13 x 6.5 - 6 in. pneumatic

Electrical

Hour Meter

Standard

Engine

Engine Make

Kawasaki®

Engine Model

Gross Horsepower

25.5 hp

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

25.5 hp

Displacement

852 cc

Ignition

Electric start, standard

Air Cleaner

Heavy-duty canister

Fuel Type

Gasoline

Fuel Capacity

8 gal.

Hydraulics

Hydraulic System

Fluid - Premium synthetic

Measurements

Cutting Width

60 in. (152 cm)

Turning Radius

Zero

Mowing Height Range

1.0 - 5.5 in. in 0.25 in. increments

Operational

Steering

Controls - 1-5/8 in. diameter grips; adjustable, dampened

Deck Construction

80-Grade 7 ga. 60 in. (152 cm) TURBO FORCE® with bull-nose bumper

Discharge

Chute - Rubber

Adjustable Baffle - Standard

Chute - Rubber

Adjustable Baffle - Standard

Spindles

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Housing - 9 in. (22.9 cm) diameter cast aluminum

Bearings - Greaseless ball

Blades

0.25 in. (0.6 cm) thick heat-treated steel

Blade Tip Speed

18,300+ ft. / min. (5,577.8 m. / mim.)

Features

DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.

Features

DELUXE HANDCRAFTED SEAT WITH ARM RESTS: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
7-GAUGE, HIGH-STRENGTH STEEL: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
RUGGED FRAME: A commercial-grade carrier frame, constructed of 3" x 1.5" tubular steel, supports the cutting deck and stands up to the rigors of professional use.
FOLDING ROLLOVER PROTECTION SYSTEM ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
CAST ALUMINUM SPINDLE: Cools quickly for enhanced durability and performance.

Compare Models

2022 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp

2022 Toro Z Master 3000 60 in. Kawasaki FX 25.5 hp

General Information

Body

Drivetrain

Electrical

Engine

Hydraulics

Measurements

Operational

Features

Features

New England Power Equipment